bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 vishay general semiconductor document number: 88548 revision: 29-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 47 surface mount schottky barrier rectifier features ? melf schottky rectifier ? ideal for automated placement ? guardring for overvoltage protection ? low power losses, high efficiency ? low forward voltage drop ? high surge capability ? meets msl level 1, per j-std-020, lf maximum peak of 250 c ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications mechanical data case: do-213ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type primary characteristics i f(av) 1.0 a v rrm 20 v to 60 v i fsm 30 a v f 0.50 v, 0.70 v t j max. 125 c, 150 c do-213ab maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym13-20 bym13-30 bym13-40 bym13-50 bym13-60 unit denotes schottky devices: 1st band is orange sgl41-20 sgl41-30 sgl4 1-40 sgl41-50 sgl41-60 polarity color bands (2nd band) voltage type gray red orange yellow green maximum repetitive peak reverse voltage v rrm 20 30 40 50 60 v maximum rms voltage v rms 14 21 28 35 42 v maximum dc blocking voltage v dc 20 30 40 50 60 v maximum average forward rectified current (fig. 1) i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction temperature range t j - 55 to + 125 - 55 to + 150 c storage temperature range t stg - 55 to + 150 c
bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88548 revision: 29-apr-08 48 note: (1) pulse test: 300 s pulse width, 1 % duty cycle note: (1) thermal resistance junction to te rminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal note: (1) automotive grade aec q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol bym13-20 bym13-30 bym13-40 bym13-50 bym13-60 unit sgl41-20 sgl41-30 sgl41-40 sgl41-50 sgl41-60 maximum instantaneous forward voltage (1) 1.0 a v f 0.50 0.70 v maximum reverse current at rated dc blocking voltage (1) t a = 25 c t a = 100 c i r 0.5 ma 10 5.0 typical junction capacitance 4.0 v, 1.0 mhz c j 110 80 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol bym13-20 bym13-30 bym13-40 bym13-50 bym13-60 unit sgl41-20 sgl41-30 sgl41-40 sgl41-50 sgl41-60 maximum thermal resistance (1) r ja r jt 75 30 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode sgl41-40-e3/96 0.137 96 1500 7" diameter plastic tape and reel sgl41-40-e3/97 0.137 97 5000 13" diameter plastic tape and reel bym13-40-e3/96 0.137 96 1500 7" diameter plastic tape and reel bym13-40-e3/97 0.137 97 5000 13" diam eter plastic tape and reel sgl41-40he3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel sgl41-40he3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel bym13-40he3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel bym13-40he3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel figure 1. forward current derating curve 0 25 50 75 100 125 150 175 p. c . b . m o u nted on 0.24 x 0.24" (6.0 x 6.0 mm) copper land areas resisti v e or ind u cti v e load sgl41-20 to sgl41-40 sgl41-50 and sgl41-60 1.0 0.75 0.50 0.25 0 a v erage for w ard c u rrent (a) terminal temperat u re (c) figure 2. maximum non-repetitive peak forward surge current 1 5 10 15 20 25 30 10 100 at rated t d 8 .3 ms single half sine- w a v e nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a)
bym13-20 thru bym13-60, sgl41-20 thru sgl41-60 vishay general semiconductor document number: 88548 revision: 29-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 49 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics 0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1 10 0.1 0.01 100 sgl41-20 to sgl41-40 sgl41-50 and sgl41-60 p u lse w idth = 300 s 1 % d u ty cycle t j = 150 c t j = 125 c t j = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 0 20 40 60 8 0 100 1 10 100 0.1 0.01 0.001 t j = 125 c t j = 25 c t j = 75 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) sgl41-20 to sgl41-40 sgl41-50 and sgl41-60 figure 5. typical junction capacitance 1 10 100 0.1 1000 100 10 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p re v erse v oltage ( v ) j u nction capacitance (pf) sgl41-20 to sgl41-40 sgl41-50 and sgl41-60 do-213ab 1st b and denotes type and positi v e end (cathode) 1st band soldera b le ends d2 = d1 + 0 - 0.00 8 (0.20) d2 0.105 (2.67) 0.095 (2.41) d1 = 0.022 (0.56) 0.01 8 (0.46) 0.022 (0.56) 0.01 8 (0.46) 0.205 (5.2) 0.1 8 5 (4.7) mountin g pad layout 0.13 8 (3.5) max. 0.049 (1.25) mi n . 0.23 8 (6.0) ref. 0.11 8 (3.0) mi n .
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
